X10 Conference
The X10 Conference Table merges refined craftsmanship with intelligent functionality, making it ideal for high-end meeting environments.
This is a sophisticated and customizable solution, offering seamless cable management, premium finishes, and precision detailing to elevate any executive meeting space.
Table top Options:
Wood Tops
Made from 18mm MDF with a 0.6mm wood veneer and matte semi-open pore varnish. Edged with 1mm veneer and 0.5mm radius corners, the top features 90° folded front and back edges, forming 50mm vertical faces with perfectly aligned grain.
Each end is finished with a 50mm high, 4mm thick brushed and polished extruded aluminum trim.
A central 450x120mm cutout houses a dual-sided opening extruded aluminum cable flap with two brush strips (available polished or powder-coated). Beneath it, a 450W x 120D x 110H mm open-ended steel tray allows cable access and routing to floor level.
Leather Tops
Constructed from 18mm melamine-faced particle board with a 1.3mm abrasion-resistant leather surface, detailed with matching stitching. Finished with 0.4mm melamine edging and 0.5mm radius corners.
The ends feature the same 50mm brushed aluminum trim. A central 450x120mm leather-covered flap (with brush strips) provides access to the same concealed cable tray and routing system.
Legs
Slightly angled, the legs taper toward the base for a modern look. The internal frame is built from welded steel rectangular tubes (50x50mm and 60x30mm; 3mm/2mm thick). Cladded in 30mm curved MDF with 0.6mm wood veneer and semi-open pore varnish, the leg covers are removable for cable access via internal vertical channels and a lower exit slot.
Each leg includes two manually adjustable steel leveling feet (0–10mm) with scratch-resistant ABS bases. For single-top tables, an additional 12mm epoxy-coated steel base plate with felt pads is added and finished with a 1mm brushed stainless steel sheet.
Under-Desk Support
Two 70x30mm steel beams (2mm thick) reinforced with 4mm C-shaped steel sections support the tabletop. All steel components are epoxy powder-coated for durability and stability.